In my last post, I've introduced the new building blocks chosen for integration with the existing speakers for my renewed AV system. You may have spotted that they are practically all last year's model! I think if if one is looking for value performance and not necessary must have the latest specs, then last year's models at clearance prices can make great buys, for those on a limited budget like me.
For me at least, all the best equipment is pointless, as I must still find a way to integrate them in to my family lounge. The trick is in the AV rack, which I've chosen to by pass all those performance enhancing specialty rack for this lovely looking, solid hard wood AV rack, which softens the overall hard edge look of the display and equipment, to fit in to my domestic lounge decor, mostly made from similarly warm tone lacquered hard wood too. It took me a while to do furniture shopping while all the equipment arrived and awaiting to be set up.
Astro cable TV decoder made by Philips and Pioneer BDP-140 represents the source of my home entertainment. |
With the arrival of the AV rack a week or so later allowed me to proceed with setting the system. A good buddy, who is an authoritative figure in the industry came to lend his pair of hands and expertise in helping me do the initial set up. The whole process of connecting all the cables and making doubly sure that everything has it's place took nearly 3 hours of hard work, including using the Audyssey as starting point 5.1 chanel calibrating but when the first disc was ready to play, it was testing time.
We used a variety of Blu-ray movies to reference the sound calibration, including Avatar, Transformers 3, and Lord Of The Rings Trilogy. Some of my older reference DVDs, like Black Hawk Down and Terminator 2 were also used to familiarised my self to the new system. The remaining fine tuning was for the 5.1 chanel surround set up was completed over a course of two weeks, with more movies and pop corn sessions. It doesn't really feel like work actually!
The Bose VCS 10 center chanel speaker is probably the weakest link in my AV set up for now. Plans are in place to do something about it. Stay tune to find out. |
The final result I got was brilliant pictures and big sound quality to match. The system went pretty loud too, and seemingly able to rumble the family lounge when the movies call for it. The surround panning effect works seamlessly to immerse the movie experience that bit more satisfactory. I get a kick when kids and some un suspecting adults turn their heads towards the back as the surround effect pans out, only to realised I've got a pair of really small Bose VCS-30 speakers around the back, while watching movies. The element of surprise is relevant for one to get totally absorb in to the movie one is watching. Dialogues are highly intelligible and clear if a little weedy sounding, compared to the big, full bodied sounds of the front and surround effects. For me, this is an area that needs to be further improved, at least to get as tonally seamless with the big Bose 301 Series II as possible. I've figured out the improvement plans, which will need a bit of time to materialised. Also on my mind is that 10AWG power cord for the Denon AVR 1612 receiver, which can still be heard to be performing on the edge when loud explosions and dynamic sound track passages. The symptoms manifest it self as the sound just one the verge of breaking up on the near max volume.
Remote control heaven! From left: Astro, Samsung, Denon and Pioneer. |
A scene from Lord Of The Rings Trilogy. Mood lights are dimmed for best viewing pleasure. |
It's been a fun and satisfying experience setting this AV system, which is my fourth project(my first AV project was under taken in the early 1990's. It was a full fledge projector based, 5 chanel(there was no.1 yet at the time!) Dolby AC-3 system, comissioned by my dad in his home) over the years by the way. More AV adventures to come as I set about to unleash the full potential of my AV system.
Hi BigE,
ReplyDeleteAny plan of getting a minimum ac protection for the display & equipments at the same time prolonging equipments life span ( cooler operation ) & improving PQ ( black level, 3d..) ; AQ ( dynamic headroom, low bass definition.. )? the lowest Isotek model - Mira ac conditioner with max 1200 w total, would effectively complete the task.
Tan,
ReplyDeleteThanks for reminding me about that all important part about power protection.
I did briefly tried to power up everything thru an DIY power filter, but the Denon AVR 1612receiver didn't like the filter choking it's power delivery.
My Samsung display and Astro decoder is currently protected by a lightning arrestor suplied during the Astro decoder install.
The Isotek Mira will certainly make a fine addition, I would suspect. Time to get one for trial.
BigE,
ReplyDeleteThis little Mira has amazed me with its improvement on PQ & AQ of my friends entry level projector based 7.1 class AB Onkyo & Denon receivers/ class AB 12 inch JBL sub systems, also on my living room plasma tv based av set...my plasma tv amazingly runs way cooler than running without !
Only 16Awg stock cables are used for the mentioned Mira, receivers & subs, no "choking" are ever experienced in high spl & quite big room playback.
Mira is the only affordable yet effective product i can think of. I don't know how it will suit your class D Denon, may give it a try.
Ps, it can condition Astro's antenna output with satisfactory PQ improvement too.
Tan,
ReplyDeleteThe Isotek Mira has a new version on the way next month. Will hold out till the new model arrives.
BigE,
ReplyDeleteSpare some cash for one of those Logitech remote control to replace all those individual remote you have. Go for the 1100i ... You will not regret it.
elhefe,
ReplyDeleteThanks for another good suggestion.
More $$$ to spend.
if the equipments are networked, most likely u can use your ipad/iphone or android phones/pads to control them.
ReplyDeleteif not, then u can try these:
http://store.griffintechnology.com/beacon
https://www.l5remote.com/
good luck!
wps